Robopac ORBIT 16 User Manual

ORBIT 16
6.3.7.DATE AND TIME
SETTING
For this operation
proceed in the
following way.
1. Display the main page
(see 6.3. “Operating
terminal description” -
“Main screen“).
2. Tap the key (C) to
open the general
parameters screen.
3. Touch the key (3) and
access via password,
as machine manager
(see 6.3. “Operating
terminal description” -
“Operator and
password change”).
4. Tap the key (2) to
open the “H.M.I
Permissions” screen.
5. Tap the key (2.3) to
display the date and
time setting screen.
6. After setting the date
and time, confirm by
pressing the push-
button (D).
Confirm by tapping the
key (E) to return to the
main screen.
6.3.8.DESCRIPTION OF CONTROL
PANEL MANUAL CONTROLS
Manual controls are to be used to
individually operate the machine moving
parts, in case of service or control before
the automatic cycle start-up.
By touching the key (A) on the main
page, you can access the manual
movements.
By touching the image of the object you
want to move, you will enable the keys
corresponding to the possible
movement.
65/95

Robopac ORBIT 16 Specifications

General

Brand	Robopac
Model	ORBIT 16
Category	Stretch Wrapping Systems
Language	English