Robopac ORBIT 16 - 7.8. MACHINE CLEANING

ORBIT 16
1. Loosen the fastening nuts.
2. Tighten the screws (A).
3. Tighten the nuts.
|
Important
T
ensioning must be performed equally on both sides of the conveyor as to maintain the belt centred during it
s
movement.
7.8. MACHINE CLEANING
General cleaning of the machine is fundamental to guarantee efficiency in the long run.
All the machine must be kept free from dust, dirt and foreign bodies.
T
he chromed shafts must be cleaned with a cloth and sli
g
htl
y
lubricated with a cloth soaked in Vaseline oil.
T
he
p
arts in
p
lastic material must be cleaned with a sli
g
htl
y
dam
p
cloth; do not use alcohol,
p
etrol or solvents.
T
he control panel is only to be dusted with a dry cloth.
For the cleaning of the parts inside the machine consult our Technical Assistance Service personnel.
86/95