ORBIT 16
D) Fixed protection panels
They prevent access to the internal parts of the machine.
E) Solenoid drain valve
Closes the compressed air input when the machine is without electrical power.
F) Bi-stable solenoid
It blocks all pneumatically activated movements when electricity is shut off, whether caused by a black-
out or by activating the emergency button.
G) Alarm signalling
The operator panel display signals any anomalies that could occur in the machine.
H) Lockable air inlet tap
If closed and locked, it prevents the machine from being started by unauthorised individuals.
L) Pressure switch
sets the machine in emergency when line pressure is lower than preset value.
M) Movable safety guards
They prevent access to the internal parts of the machine.
N) Light curtains (Orbit 16 M version only)
They stop the machine when their beam is interrupted by any other object than the product to be
wrapped.
To Next Page
Loading...
