Roche Diagnostics
184 Instructions for Use · Version 10.0
Index 9180 Electrolyte Analyzer
– Linearity in serum, 38
Lithium electrode, 61
M
Maintenance, 131
– Annual maintenance, 141
– Exchanging main tubing harness, 141
– Daily Maintenance, 133
– Disinfection, 131
– Recommended disinfectants, 132
– Monthly maintenance, 137
– Cleaning the reference electrode housing, 137
– Semi-annual maintenance, 140
– Exchanging the pump tubing set, 140
– Unscheduled maintenance, 142, 149
– Checking reagent fluid level and changing the
SnapPak, 145
– Replacing electrodes, 143
– Replacing printing paper, 148
– Replacing sample probe and fill port, 147
– Weekly maintenance, 135
– Clean sample probe and fill port, 135
– Cleaning surfaces of the analyzer, 136
Maintenance schedule, 175
Material setup, 121
Measurement evaluation, 31
Measurement procedure, 30
Measuring procedure, 108
– Sample measurement, 108
– Direct ISE, 110
– Urine samples, 110
Monthly maintenance, 137
N
Normal ranges (reference values), 112
O
Operator’s Manual
– version, 2
P
Performance parameters, 35
– Measurement parameters, 35
– Reproducibility, 35
Performing a QC measurement, 123
Potassium electrode, 58
Preanalytics, 99
– Sample collection, 99
– Sample collection containers, 100
– Sample handling, 101
– Whole blood, 101
Preface, 7
– Conventions used in this manual, 7
Preparing the analyzer for operation, 86
– Installing the printer paper, 88
– Installing the SnapPak, 87
– Selecting language, 86
– Selecting parameter configuration, 91
– Setting date and time, 87
– Start-up, 86
Principles of operation, 53
– Measurement principle, 53
– Physical principle, 54
Printer, 47
Printing a QC report, 125
Product data, 47
– Classification, 47
– Dimensions, 47
– Display, 47
– Electrical data, 47
– Printer, 47
Program flow chart, 174
Publication information, 2
Q
Quality control, 119
– General QC concept, 119
– Material setup, 121
– Performing a QC measurement, 123
– Printing a QC report, 125
R
Reference and critical ranges
– Critical ranges, 52
Reference and critical values, 51
– Reference / normal ranges, 51
Reference electrode assembly, 62
Relationship of ionized calcium to total calcium, 41
Removing the electrodes and the shutdown plug, 94
Replacing electrodes, 143
Replacing printing paper, 148
Replacing sample probe and fill port, 147
Replacing the mains fuses, 149
S
Safety information, 17
– Safety classifications, 18
– Safety labels on the instrument and consumables, 25
– Safety precautions, 19
– Biohazardous materials, 21
– Electrical safety, 20
– Incorrect results, 23
To Next Page
Loading...
