Rockwell Automation ArmorStart Bulletin 280G - User IO

Bulletin 284G Programmable Parameters for Sensorless Vector Controllers 4-15
User I/O Group
Off-to-On Delay
This parameter allows the installer to program a time duration before being reported
ON.
Parameter Number 30
Access Rule GET/SET
Data Type UINT
Group User I/O
Units ms
Minimum Value 0
Maximum Value 65.000
Default Value 0
On-to-Off Delay
This parameter allows the installer to program a time duration before being reported
OFF.
Parameter Number 31
Access Rule GET/SET
Data Type UINT
Group User I/O
Units ms
Minimum Value 0
Maximum Value 65.000
Default Value 0
In Sink/Source
This parameter allows the installer to program the inputs to be sink or source.
0 = Sink
1 = Source
Parameter Number 32
Access Rule GET/SET
Data Type BOOL
Group User I/O
Units —
Minimum Value 0
Maximum Value 1
Default Value 0