Rohde & Schwarz SCV8000E/R - Further Menu Branches (Webgui Only); Menu Branch Precorrection; Menu Item Sx801 > Parameter Set

Chapter 5 Operating
2104.6536.72 - 5.37 - E-1
2.3 Menu Item Sx801 > Parameter Set
2.4 Further Menu Branches (WebGUI Only)
2.4.1 Menu Branch Precorrection
The navigation area is the interface to the precorrector GUI (integrated software for trans-
mitter precorrection with individual web interface).
Device Manual R&S SX801
Boards > Manual R&S SX801
Coder
RF Board
Amplifier
GPS Board
Receiver/Monitor
Receiver AUX/
Monitor AUX
ParI/O
a) Path changed from previous value of "TV Settings" to "Exciter"
b) Can only be seen when the ATV software option is enabled.
c) Path changed from previous value of "System Setup" to "System"
Level 1 > Level 2 > Level 3 > Parameter
Parameter Set > Setting items:
– Load settings from
– Save settings to
– Copy set x to y
– Swap set x and y
– Parameter Set 1 .. 8
Displays:
– Loaded Set
– Operation Stat
– Current Set Changed
Level 1 > Level 2 > Level 3 > Level 4 > See