Chapter 5 Operating
2104.6536.72 - 5.15 - E-1
Can't log on?
Logging on can fail for the following reasons:
– Three other users already logged on via the web browser. The maximum permitted num-
ber of simultaneous sessions has been reached. On the other hand it is always possible
to log on as Superuser.
– Incorrect ID and/or password entered.
After three failed attempts at logging on, the requesting IP address is prevented from
logging on for 30 minutes.
1.3.3 Browser-Based Operation
The following opening screen appears after logging on:
Maintenance Allows you to perform maintenance tasks; e.g. software
update
1234
Operation Allows you to make settings that directly affect transmitter
operation
1234
Query Read-only authorization 1234
Guest Read-only authorization – see Query 1234
Config-Engl Same as Configuration authorization; this ID also
changes the menu language to English (irrespective of
the preset language, e.g. Chinese)
1234
Superuser For configuring, creating and deleting user profiles, and
for displaying and deleting active sessions; no authoriza-
tion for setting transmitter parameters – see Query
1234
User ID Authorization Password
To Next Page
Loading...
