Chapter 5 Operating
2104.6536.72 - 5.50 - E-1
– Time: Time of day of the event
– Date: Date of the event
Date and time of an event in the instrument display
1. To display the date and time, select a message and call the info window by pressing OK.
2. Press Back to close the info window and to return to the normal logbook view.
Note The logbooks are sorted according to UTC.
3.2.2 Logbook Context Menu
Additional context functions are available in the menu windows for the complete logbook
and the partial logbooks:
3.3 Submenu System > Tx Type
The System > Tx Type submenu is used to set the TV standard. It also includes a time
scheduler for time-controlled transmission using different TV standards (multi-standard op-
erating mode) and further settings that affect the behavior of the parallel remote control in-
terface and the whole system.
Menu windows
The Tx Type menu branches to the following menu windows:
Function Explanation
Clear logbook Clears all entries in the current logbook; clearing individual logbook
entries is not possible.
When you clear the complete logbook, the partial logbooks are also
cleared. A Reset Fault is triggered at the same time.
Restore logbook Restores the cleared entries in the current logbook.
When you restore the complete logbook, the partial logbooks are also
restored.
To Next Page
Loading...
