Chapter 5 Operating
2104.6536.72 - 5.57 - E-1
4 Further Menus
4.1 Multiple Parameter Sets: Parameter Set Menu
You can use the Parameter Set menu window to create, load and save parameter sets for
a number of different overall configurations. If the operating environment changes (e.g.
change of frequency) you can access complete parameter sets instead of having to set
each individual value. You have eight memory locations available in addition to the active
memory location (for the parameter set loaded).
Function Description
Parameter Set
Load settings from For selecting a parameter set as the current parameter set; the currently
loaded parameter set acts as an independent copy of the stored param-
eter set.
Save settings to For saving the currently active settings to the chosen memory location.
Copy set x to y For selecting a parameter set x, the content of which you wish to save to
another memory location y. To start the copying procedure, select Copy
and confirm with OK.
Swap set x and y For selecting two parameter sets x and y, the content of which you wish
to swap. To start the swap procedure, select Swap and confirm with OK.
To Next Page
Loading...
