Rohde & Schwarz SCV8000E/R - R&S Vh8 X01 C2 Extended Amplifier - Rear Panel; X1 (MAINS): Power Feed (AC); X2 (POWER OUT): RF Output

Chapter 9 Annex
2104.6536.72 - 9.9 - E-1
1.2.4 R&S VH8x01C2 Extended Amplifier – Rear Panel
1.2.4.1 X1 (MAINS): Power Feed (AC)
85 V to 265 V AC
M3E+6X+PE connector from Schaltbau
Note The instrument must first be connected to the safety ground. The line filter is built into the
Power Adaptor Board.
1.2.4.2 X2 (POWER OUT): RF Output
N, female
Signal
name
Direction Value range Contact Remarks
L Input U
nom
= 100 V to 240 V AC (±10 %);
50 Hz to 60 Hz (±5 %); cos  0.9;
I  10 A (230 V)
I  21 A (110 V)
I  26 A (90 V, base amplifier)
I  27 A (90 V, extended amplifier)
X1.2 AC supply
N Input 0 V X1.5 AC supply
PE Input 0 V X1.PE AC supply
Signal name Direction Range of values Contact Comment
POWER_OUT Output P
rms,nom
= 400/600 W
470 MHz to 862 MHz
at 50  load,
VSWR  1.4
X2 RF output (extended
amplifier)