Rohde & Schwarz SCV8000E/R - Amplifier > Service > AMP 1;AMP 2

Chapter 5 Operating
2104.6536.72 - 5.56 - E-1
3.4.4 Amplifier > Service > AMP 1/AMP 2
Display Explanation
Ix Module current of an output stage module, x = 1 to 4
a)
a) With the amplifiers in the R&S VH8001Cx family, no current measured value I4 is displayed.
I Pre Preamplifier current
I Drv x Module current of a driver module, x = 1 to 2
Temperature Heat sink temperature on the amplifier
Amp Mon Att Attenuation value on the AMP RF MON connector of the respective
amplifier
Power Out Total forward power of the amplifier
Reflection Total reflected power at the amplifier
V Ref Reference voltage of the amplifier
V Reg AGC voltage of the amplifier
PWR A/PWR B Detector voltage for forward detector A or B
V Aux 1/V Aux 2 Detector voltage for auxiliary detector Aux 1 or Aux 2