Chapter 5 Operating
2104.6536.72 - 5.60 - E-1
2. Select (depending on the window) which data is to be displayed (see the table under
"Functions in Logbooks Window").
3. Start readout of the data with Rescan (if this function is available in the window).
Saving data
Different options and formats are available for saving the data.
1. Under Output Format, select the file format in which the data is to be saved.
2. In the Output menu, select whether the data is to be saved as a file (Write to File) or
copied to the clipboard (Copy to Clipboard).
Depending on your selection, you can save the data in a file using the Windows Save
command or copy it to the clipboard and then use it in other applications.
Note If the data is to be evaluated in a spreadsheet application (e.g. Microsoft Excel) it is ad-
visable to copy the data to the clipboard in HTML format. If the clipboard is then copied
to an (empty) worksheet, the values are separated in tabular form.
4.2.1 Functions in LogBooks Window
The following additional functions are available in the Logbooks window:
4.3 Backup of Parameter Data: Menu Item Storage
See chapter "Maintenance" (exciter manual).
Function Explanation
Message Type Used to select the type of messages which are to be listed (more than
one option can be selected)
Device Used to select the transmitter components for which message data is to
be displayed (more than one option can be selected)
Display Used to show and hide the columns Counts (shows the number of mes-
sages of this message type) and Source (shows the transmitter compo-
nent to which the message is assigned)
Last/First On Top Sorts the displayed messages according to the time at which they
occurred
Clear (Real) deletion of the logbook entries (identical to deleting the logbook
entries using the context menu of the Logbook menu window)
Restore (Real) restoration of the logbook entries (identical to restoring the log-
book entries using the context menu of the Logbook menu window)
Rescan Updates the displayed messages
To Next Page
Loading...
