Chapter 5 Operating
2104.6536.72 - 5.59 - E-1
Note Execution of the TxTool requires write rights to the file system of the computer. To grant
these rights you must confirm the security query.
If you select Always trust content from this author, the security query will not be dis-
played the next time the TxTool is called.
2. Confirm the security query with Run.
The TxTool window used to display and save transmitter data appears.
The window is initially empty when opened. The required settings must be selected before
the data is read out.
Reading out data
1. Select (top left) the data that is to be displayed.
Different windows containing additional functions are displayed depending on the type
of data you select. Depending on the selected tab, the window will still be empty (e.g.
LogBooks) or the appropriate data will be displayed (e.g. DeviceInfo).
To Next Page
Loading...
