Rohde & Schwarz SCV8000E/R - Selecting and Editing Settings

Chapter 5 Operating
2104.6536.72 - 5.6 - E-1
Alternative method of opening menus
Use the OK key (press briefly) to open the SX801 menu tree straight from the system over-
view.
Fig. 7 SX801 menu tree
1.2.3.4 Selecting and Editing Settings
Note Only those parameters identified by a double arrow can be adjusted.
Locked and variable settings
Depending on the user rights concerned and the type of access (local or remote access)
some or all processing parameters can be locked. These include restrictions arising from
the actual constellation chosen. An appropriate symbol in front of the parameter value
shows whether or not a parameter can be changed at this time.
Examples:
Symbol Meaning
The present user can change the setting. A change takes effect straight away.
The present user can change the setting. For the setting to take effect, a restart
a)
Is required.
a) Execute the Restart command in the context menu for System > Tx Type > Transmitter to restart.
The setting cannot be changed at the present time. Possible reasons:
– The user does not have the necessary rights.
b)
– Access is via the remote port whereas the instrument is in local mode.
– Access is local whereas the instrument is in remote mode.
b) The Info command from the context menu gives information on the necessary user rights among other
things.
Setting is not possible in this constellation.
- none - This parameter value is for a display; it cannot be set.