Chapter 5 Operating
2104.6536.72 - 5.7 - E-1
1) Setting can be modified; a change takes effect immediately.
2) Setting can be changed, but the instrument needs to be restarted.
3) Maintenance rights are needed to modify the selected setting.
1) The selected parameter cannot be modified at this time (lack of authorization or local/remote state not appro-
priate).
Making a selection using the Selection Editor
Fig. 8 Selecting value
1. Select the setting using the cursor keys .
2. Confirm the selection with OK.
Your setting is saved and displayed in the menu window.
3. Press the HOME key to finish menu editing.
To Next Page
Loading...
