Rohde & Schwarz SCV8000E/R - Status > Input Status (for DVB)

Chapter 5 Operating
2104.6536.72 - 5.43 - E-1
3.1.3 Status > Input Status (for DVB)
- OFF - External reference frequency is not present but it is also not
needed
PPS Ok External 1PPS source is present and the reference frequency is
synchronized to the 1PPS
W External 1PPS source is not present or the reference frequency
is not synchronized to the 1PPS
F External 1PPS source is not present or the reference frequency
is not synchronized to the 1PPS and the Fail Delay Time set in
the Exciter > Reference > Common menu has expired
- off External 1PPS source is not present but it is not needed
Option Key Ok All necessary software options are enabled
W A temporary license code for a software option will expire shortly
F One or more necessary software options are not enabled
ExcTemperature Ok Exciter temperature is acceptable
F Exciter is too hot
Display LED Explanation
Automatic
Ready
Input signal automatic status reporting
Ok Automatic system is switched on and ready to switch over from
the preselected input to the standby input as soon as the signal
on the preselected input is disrupted
- OFF - Automatic system is switched off or is not ready since a change
over to the standby input took place and automatic ready is not
desired (in the Exciter > Input > Input Automatic menu, the
setting Automatic Ready After Change Over > OFF is
selected)
Automatic
changed over
W The automatic system has switched over to the standby input
- OFF - Change over did not take place
Display LED Explanation