Rohde & Schwarz SCV8000E/R - Amplifier > Setup > Output Power

Chapter 5 Operating
2104.6536.72 - 5.54 - E-1
3.4.2 Amplifier > Setup > Output Power
Temperature
supply R
Ok Temperature of standby amplifier power supply in acceptable
condition
F Temperature of standby amplifier power supply too high
Transistor Ok All output stage transistors in amplifier working properly
F One or more output stage transistors defective
For more Information, see Amplifier > Service > AMP 1 / AMP 2
menu.
Driver Ok All driver transistors in amplifier working properly
F One or more driver transistors defective
For more Information, see Amplifier > Service > AMP 1 / AMP 2
menu.
Amp Tempera-
ture
Ok Temperature of power amplifier module in acceptable condition
F Temperature of power amplifier module too high
Blower Ok The two fans in the amplifier are working properly
F One or both fans have failed
Regulation Ok Power regulation is working properly
F Power regulation faulty
Please contact your local service representative.
DC Supply 1 Ok Amplifier power supply 1 working properly
F Amplifier power supply 1 defective
DC Supply 2 Ok Amplifier power supply 2 working properly
F Amplifier power supply 2 defective
DC Supply R Ok Standby amplifier power supply working properly
F Standby amplifier power supply defective
Display LED Explanation