Chapter 8 Service
2104.6536.72 - 8.7 - E-1
4 Backing Up and Restoring the Configuration
Settings
Prior to replacing the R&S SX801 exciter, all of the configuration settings can be saved on
the PC.
If the All option is used, all of the settings for the currently selected operating mode will be
saved. These settings can be restored once the exciter has been exchanged.
Fig. 3 Calling the "Storage" function
Fig. 4 Backing up all of the configuration settings: "All" option
Note For more detailed information about the Storage function, please see the "Maintenance"
chapter, section "Backing Up Parameter Data" in the exciter manual.
To Next Page
Loading...
