Chapter 8 Service
2104.6536.72 - 8.3 - E-1
1.2.2 Single Transmitter with Two Amplifiers
Fig. 2 Example: Cabling the R&S SCV8302E
1) Power feed
2) ASI input
3) RF signal from exciter to input of base amplifier
4) RF signal from integrated splitter of base amplifier to input of extended amplifier
5) CAN bus
6) RF signal from output of base amplifier to input of integrated combiner in extended amplifier
7) RF signal from output of extended amplifier to input of integrated combiner in extended amplifier
8) Transmitter output (RF signal at output of integrated combiner in extended amplifier)
To Next Page
Loading...
