Chapter 5 Operating
2104.6536.72 - 5.19 - E-1
Examples:
1) Setting can be modified; a change takes effect immediately.
2) Setting can be changed, but the instrument needs to be restarted
3) Maintenance rights are needed to modify the selected setting.
1) The selected parameter cannot be modified at this time (lack of authorization or local/remote state not appro-
priate).
1.3.3.1 Session End
Use the Logoff button to log off from the system correctly. If you close the browser window
without logging off, the session is automatically terminated after two minutes at most.
If the present connection was cut (e.g. because the unit was restarted), a popup window
tells you that you need to log on again. Logging on again opens a new session.
Setting is not possible in this constellation.
- none - This parameter value is for a display; it cannot be set.
a) Execute the Restart command in the context menu for System > Tx Type > Transmitter to restart.
b) The Info command from the context menu gives information on the necessary user rights among other
things.
Symbol Meaning
To Next Page
Loading...
