EasyManua.ls Logo

Rohde & Schwarz SCV8000E/R - Page 128

Rohde & Schwarz SCV8000E/R
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5 Operating
2104.6536.72 - 5.46 - E-1
Sum Warning W One or more warnings are active
Test Mode W Transmitter has been switched to test mode
HW Error F A hardware fault has occurred in one or more modules; for fur-
ther information on errors see logbook
Temperature Ok Temperature of the modules is OK
F At least one module is overheating
Fan Ok Fan is OK
W A fan has failed; there is a possibility of overheating
F The fan(s) failed; there is a high risk of overheating
Output Termi-
nated
Ok Exciter output terminated
F Exciter output open
Display Status Explanation
Displays the set audio mode:
Audio Mode Mono Mono
Stereo Stereo
Dual Dual sound
Carrier 1 Off Sound carrier 1 is not present in the RF output signal
Mod Off Modulation for sound carrier 1 has been switched off in the ATV >
Sound > FM Carrier menu
AF1+2 Carrier is modulated with the signals AF1 and AF2
AF3 Additional mono sound carrier for BTSC operation on sound car-
rier 1
BTSC Carrier is modulated with BTSC
AF1 Carrier is modulated with the signal AF1
Carrier 2 Off Sound carrier 2 is not present in the RF output signal
Mod Off Modulation for sound carrier 2 has been switched off in the ATV >
Sound > FM Carrier menu
AF1+2 Carrier is modulated with the signals AF1 and AF2
AF1 Carrier is modulated with the signal AF1
AF1-2 Carrier is modulated with the signals AF1 and AF2
Display LED Explanation

Table of Contents

Related product manuals