The pinch rollers cannot be moved directly by hand. Move them with the media
guide.
Attempting to forcibly move these rollers may result in injury.
CAUTION
3. As shown in the figure, pass the media under the front cover and pull the media out the other side.
4. Start initial operation.
(1) Make sure the left media guide (
) is pressed against the media flange.
(2) Close the front cover ( ).
(3) Pull the loading lever (
) forward.
Pull the loading lever forward to start initial operation. When the [POWER] key indicator
changes from flashing to steady, initial operation is complete.
Printing
Basic Operations 25
To Next Page
Loading...
