40
Reference Manual
00809-0100-4803, Rev GA
Configuration
September 2017
Configuration
If conversion factor tables or internet search engines are used to determine the Base per Custom value, it
is important to enter the Custom Unit in the “From” field and the Base Unit in the “To” Field. An example
of this is shown below:
To calculate the Base per Custom value for a custom unit not shown in Table 2-9 on page 39, see one of
the following examples:
Mass/volume conversion example: page 41
Time conversion example: page 42
Mass/volume and time conversion example: page 43
Millions of Gallons per Day (MGD) gal/d 1000000
Millions of Liters per Day (MML/D) L/h 41666.7
Millions of Standard Cubic Feet per Day (MMCFD) StdCuft/min 694.444
Normal Cubic Meters per Day (NCM/D) NmlCum/h 0.041667
Normal Cubic Meters per Minute (NCM/M) NmlCum/h 60
Short Tons per Day (STOND) lb/d 2000
Short Tons per Hour (STONH) lb/h 2000
Standard Cubic Feet per Day (SCF/D) StdCuft/min 0.000694
Standard Cubic Feet per Hour (SCF/H) StdCuft/min 0.016667
Standard Cubic Feet per Second (SCF/S) StdCuft/min 60
Standard Cubic Meters per Day (SCM/D) StdCum/h 0.041667
Thousands of Gallons per Day (KGD) gal/d 1000
Thousands of Pounds per Hour (KLB/H) lb/h 1000
Thousands of Standard Cubic Feet per Day (KSCFD) StdCuft/min 0.694444
Thousands of Standard Cubic Feet per Hour (KSCFH) StdCuft/min 16.6666
Table 2-9. Common Custom Units - Flow
Custom unit Base unit Base per custom
To Next Page
Loading...
