Rosemount 8712C - Section 1; Introduction; Manual Scope; SECTION 1 Manual Scope

Section
1-1
1 Introduction
MANUAL SCOPE
The Series 8700 Magnetic Flowmeter System combines a Rosemount
magnetic flowmeter flowtube and Rosemount magnetic flowmeter
transmitter. This manual covers the Model 8712C/U/H Magnetic
Flowmeter Transmitter. For specific magnetic flowtube information,
refer to the Series 8700 Magnetic Flowmeter Flowtubes manual
(document number 00809-0100-4727).
Section 1: Introduction
• scope of the manual
• brief system and operation description
Section 2: Installation
• step by step instructions for installation and start-up
Section 3: Local Operator Interface
• Local Operator Interface (LOI)
• configuration information for the Model 8712C/U/H
Section 4: Device Software Functions
• basic software configuration functions
• special configuration modes
Section 5: Troubleshooting
• troubleshooting tables
• software test procedures
• hardware procedures for diagnosing and repairing problems
Appendix A: HART
®
Communicator
• operational features of the HART Communicator
• menu tree
• Fast Key Sequence table
• diagnostic messages
Appendix B: Wiring Diagrams
• specific wiring diagrams for the connecting of the
Model 8712C/U/H to most flowtubes currently available
• generic wiring diagram
Attempting to install and operate the Model 8705, Model 8707 High-Signal, or
Model 8711 Magnetic Flowmeter Flowtubes with the Model 8712, Model 8732, or
Model 8742 Magnetic Flowmeter Transmitter without reviewing the instructions
contained in this manual could result in personal injury or equipment damage.