Rotax 912 Series Installation Manual

d04927.fm
INSTALLATION MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2/Rev. 0
79-00-00
page 22
August 01/2012
- If this position is not practical, also install the oil cooler with the radiator
caps pointing upwards, i.e. in positive direction on the z-axis.
3.2) Capacity
Oil tank - Capacity without oil cooler and connecting lines min. 3 l (0.8 USgal)
depending on the respective installation.
- Perform oil level check and add oil if necessary.

WARNUNG
NOTICE
This will prevent unintentional draining of the oil cooler
during longer periods of engine stop.
Volume of oil tank
Up to the MIN.-mark 2.5 l (0.66 US gal)
Up to the MAX.-mark 3.0 l (0.8 US gal)

Rotax 912 Series Specifications

General

Redline	5800 rpm
TBO	2000 hours
Displacement	1211 cc
Bore	79.5 mm
Stroke	61 mm
Power Output	80 hp (59.6 kW)
Compression Ratio	9.0:1
Fuel Type	Avgas 100LL
Ignition System	Dual electronic ignition
Fuel System	Fuel Injected
Oil System	Dry sump
Engine Type	4-cylinder, horizontally opposed, 4-stroke