EasyManuals Logo

Rotax 912 Series Installation Manual

Rotax 912 Series
199 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
d04919.fm
INSTALLATION MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2/Rev. 0
10-10-00
page 4
August 01/2012
1.3) Preservation and storage of the engine
General note The engine is preserved at BRP-Powertrain thus guaranteeing proper pro-
tection against corrosion damage for at least 24 months after the date of
delivery from BRP-Powertrain.
Warranty This warranty is subject to the following conditions:
- The engine must be stored in the GENUINE-ROTAX packing as sup-
plied by BRP-Powertrain.
- The covers on various openings must not be removed.
- The engine must be stored in a suitable place (at min. -40 °C/-40 °F
and max. +80 °C/176 °F).
- The flat bag (blue) surrounding the engine must not be damaged or
removed, as it protects the engine from corrosion and oxidation.
Storage If the engine is stored for a period longer than 12 months (not stored in the
GENUINE-ROTAX packing) then maintenance tasks must be carried out
every 3 months as per the currently valid Maintenance Manual, section
“Preservation of a new engine“.

Table of Contents

Other manuals for Rotax 912 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rotax 912 Series and is the answer not in the manual?

Rotax 912 Series Specifications

General IconGeneral
Redline5800 rpm
TBO2000 hours
Displacement1211 cc
Bore79.5 mm
Stroke61 mm
Power Output80 hp (59.6 kW)
Compression Ratio9.0:1
Fuel TypeAvgas 100LL
Ignition SystemDual electronic ignition
Fuel SystemFuel Injected
Oil SystemDry sump
Engine Type4-cylinder, horizontally opposed, 4-stroke

Related product manuals