d04918.fm
INSTALLATION MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2/Rev. 0
00-00-00
page 10
August 01/2012
4) Safety notice
General note Although the reading of such information does not eliminate the hazard, it
promotes the understanding and application of the information contained
in for correct use of the engine. Always use common workshop safety
practice.
The information and components system descriptions contained in this
Manual are correct at the time of publication. BRP-Powertrain maintains a
policy of continuous improvement of its products without imposing upon
itself any obligation to install them on its products previously manufac-
tured.
Revision BRP-Powertrain reserves the right at any time, and without incurring obli-
gation, to remove, replace or discontinue any design, specification, feature
or otherwise.
Measure Specifications are given in the SI metric system with the USA equivalent in
parenthesis.
Symbols used This Manual uses the following symbols to emphasize particular informa-
tion. This information is important and must be observed.
NOTE: Indicates supplementary information which may be
needed to fully complete or understand an instruction.
A revision bar outside of the page margin indicates a
change to text or graphic.
Identifies an instruction which, if not followed,
may cause serious injury including the possibility
of death.
Identifies an instruction which, if not followed,
may cause minor or moderate injury.
Denotes an instruction which, if not followed, may
severely damage the engine or other component.
Environment note gives you tips and behaviors to environmental protec-
tion.
To Next Page
Loading...
Need help?
General
