Rotax 915 i A SERIES Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL
Points of Inspection
Interval Operating hours Chapter
Reference
Signa-
ture
* no periodic maintenance (require-
ment after the first 25 hours of
operation)
25* 50 100 200 600 1000
Inspection of the GENUINE ROTAX®
exhaust system included in the stand-
ard delivery.
NNOOTTEE
If there is no standard/genuine ex-
haust system in use, the specifica-
tions of the manufacturer must be
observed.
X X X X
7) Oil change
Drain oil from oil tank.
X X
)3
X X X X 12–20–00
Oil change,
Flushing the
oil circuit
Check the oil tank and clean the oil
tank if contaminated.
X
)3
X X X 12–20–00
Oil change,
Cleaning the
oil tank
Refill oil tank with approx. 3 litres of oil.
For oil quality, see Operators Manual
latest edition.
X X
)3
X X X X 12–20–00
Flushing the
oil circuit,
Purging the
oil system
Cleaning oil sieve in the oil sump.
X
)3
X X X X
Install new oil filter
X X X X X X 12–20–00
Oil filter
change
)3
In the case more than 30% of operation with leaded fuel e.g.: AVGAS 100 LL
8) Fuel system
Inspect the fuel system on the engine
side for leaks.
X 12–20–00
Fuel system
Inspect the fuel system for damages.
X
9) Engine management
Check the ECU and its mountings.
X 12–20–00
Checking
ECU
Effectivity: 915 i A Series
Edition 0/Rev. 0
05–20–00
Page 11
December 01 2017

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English