Rotax 915 i A SERIES - Page 60

BRP-Rotax
MAINTENANCE MANUAL
Points of Inspection
Interval Operating hours Chapter
Reference
Signa-
ture
* no periodic maintenance (require-
ment after the first 25 hours of
operation)
25* 50 100 200 600 1000
Read out the ECU fault memory (fault
and data logs).
X X 12–20–00
Read out the
ECU data
memory
10) FUSE BOX
Check the FUSE BOX and its
mounting.
X
Visual inspection of the fuses.
X X
11) Checking the wastegate lever
Check the wastegate lever for free run-
ning and correct position
X X 12–20–00
Turbocharger
Lubricate the wastegate lever. X X 12–20–00
Turbocharger
12) Checking the propeller gear box
Check gear set (pittings)
X
See Heavy
Maintenance
Chap.
72–10–00
Check wear on tooth of overload
clutches
X
See Heavy
Maintenance
Chap.
72–10–00
Check slipping torque of all 3 overload
clutches
X
See Heavy
Maintenance
Chap.
72–10–00
Check wear on the intermediate shaft
X
See Heavy
Maintenance
Chap.
72–10–00
Change torsion shaft
X
See Heavy
Maintenance
Chap.
72–10–00
05–20–00
Page 12
December 01 2017
Effectivity: 915 i A Series
Edition 0/Rev. 0