Rev 3 (XXXX 2019)
NexU INSTALLATION MANUAL
90
The columns show the following information:
First column: Number of work order that is being delivered or ready to be delivered.
Second column: Dispensing point (UValve or UCount)
Third column: Product that being delivered or ready to be delivered.
Fourth column: It shows two numbers. The first one shows the delivered quantity. The
second one is the inserted quantity by the user when the work order was created.
Fifth column: It shows a progress bar.
Sixth column: It shows the transaction date of creation.
Seventh column: It shows who created the transaction.
Tenth column: This button cancels the delivery. That is to say, it gives an order to the
system to close the solenoid valve and it cuts the delivery.
If you press “Presets” you will see all the transactions which have been created (kept
in memory) but not delivered.
To Next Page
Loading...
