Samsung R40plus - Page 154

153
Q I cannot make a call using an extension line.
A Ingeneral,thedialtoneofaPBXoradigital
phoneswitchingsystemisnotacontinuousone,
unlike that of a trunk line.
Therefore,themodemmaynotmakeacallbecause
themodemmistakesthedialtonefromaPBXora
digitalphoneswitchingsystemasabusytone.Inthis
case,completethefollowingprocedures.
▶ Using an AT command
Asaninitializationcommand,usethecommand,
ATX3.Otherwise,entertheATX3command
manuallybeforemakingacall.
Itcancorrectthisproblembyskippingthedialtone
check step.
▶ Conguring the Modem through the Control Panel
 Click Start > Control Panel > Network and Internet
Connections.
 Under See Also,
clickPhone and Modem Options.
 In the Modems
tab,selecttheinstalledmodem,and
click Properties.
 In the Modem
taboftheModem Propertieswindow,
clearthe“Waitfordialtonebeforedialing”checkbox.

Whenthecongurationiscompleted,clickOK.
Q
How do I use my modem when dialing from
overseas?
A1 Checkthatthemodemiscorrectlycongured
according to the current country.
Because the values for communication may differ
accordingtothecountry,youmaynotbeableto
connect via the modem due to an incorrect modem
conguration.
 Click Start > Control Panel > Network and Internet
Connections.
 Under See Also,
clickPhone and Modem Options.
 In the Dialing Rules
tab,clickEdit.
 In the General
tabintheEdit Locationwindow,
select the current country from the Country/region
radio
box,specifytheAreacode,andclickOK.
A2
Because the shape of the telephone plug may
dif
feraccordingtothecountry,youhaveto
purchase and use the appropriate telephone plug
for that particular country.