Samsung R40plus - Bluetooth

162
Q
Characters are broken if I receive a business
card in Korean or Chinese using the Bluetooth
Send a Business Card function.
A1 ThismayhappenwhenyousendaKoreanorChinese
businesscardbyselectingtheSelect a business card
from the les (*.vcf, *.vcd) option in the Send a Business
Card
menu.Thisisbecausethecontentsofthebusiness
cardlearenotsettoKoreanorChinesecharacterset
(CHARSET).Inthiscase,directlyeditthecontentsofthe
businesscardleasfollows.

Right-clickoverthebusinesscardletobesent
(*.vcf,*.vcd)andselectConnect Program > Select
Program from
thepop-upmenu.
 Select Notepad from the program list.
 Edit the contents as follows.
Example)N:MagicSense=>N;CHARSET=KS_C_
5601:MagicSense
ForKorean,addCHARSET=KS_C_5601.
ForSimpliedChinese(CHS),CHARSET=gb2312.
ForTraditionalChinese(CHT),CHARSET=Big5.
A2 Toavoidthisproblem,sendabusinesscarddirectlyfrom
theaddressbookofMicrosoft Outlook or select the
Select an Outlook business card option in the Send a
Business Card menu and you can now normally send the
business
cardwithouteditingtheVCFle.
Q I cannot nd or connect the headset.
A1 If the headset is connected to another device and is
currentlybeingused,youwillnotbeabletolocateit.Inthis
case,evenifyoulocatetheheadset,youwillnotbeable
to connect it. Disconnect the headset from the device and
then try again.
A2
Iftheheadsetisconnectedtothepoweradapter,the
Bluetoothwirelessconnectionisnotavailable.Disconnect
the headset from the power adapter and try again.
A3
ABluetoothheadsetgenerallyprovidesOn/OffandPairing
modes. To connect the headset to another Bluetooth
device
suchasacomputerorcellphone,itmustbein
Pairing mode. Switch the headset to Pairing mode and try
again.
Ingeneral,aBluetoothheadsetinPairingmodeis
automaticallyswitchedtoOn/Offmodeafterapre-
determined period of time.
Bluetooth