Samsung R40plus - Page 159

158
Q
Although a connection has been established, I
cannot connect to the Internet.
▶ Check the TCP/IP settings.
A IfyoucannotconnecttotheInternetbutyouareconnected
toanAP,checkiftheTCP/IPsettingsarecongured
properly.
WhenyouarenotconnectedtoanAP,anXmark
appearsoverthe‘WirelessNetworkConnections’
icon ( )intheTaskbar.Ifyoudouble-clickthe
icon,theSearchforWirelessConnectionswindow
appears. Reconnect to a wireless network referring
to the descriptions of Connecting to a Wireless
LANintheUsingtheNetworksection.
WhenyouareconnectedtoanAP,anXmark
appearsoverthe“WirelessNetworkConnections”
icon (
)intheTaskbar.Double-clicktheiconand
check if the IP address is properly allocated on
theSupporttab.IftheIPaddressisnotproperly
allocated,theIPaddresswillbedisplayedasfollows;
(forexample,169.254.xxx.xxx).
IfyournetworkdoesnotsupportDHCP,youhave
tomanuallycongureanIPaddressbyaskingyour
network administrator.
In
addition,evenifyournetworksupportsDHCP,
theInternetconnectionmaynotbeavailableifthe
DHCP server fails to allocate an IP address to your
computer.
Q
I have congured both wired and wireless
connections with the same IP address, but the
network connections do not work properly.
A You cannot use the same IP address for wired and
wireless connections. To use only one IP address for
both
wiredandwirelessconnections,youmustdisable
oneofthemaccordingtoyourrequirementsinNetwork
Connections in the Control Panel.
Q
After installing the Wireless LAN Setting
program, the “AEGIS Protocol (IEEE 802.1x)”
protocol appears in the [Local Area Connect
Properties] window.
A The protocol is a security authentication protocol that is
automaticallyinstalledwhentheWirelessLANSettings
program is installed and does not affect the program
operation.
Q
(For Intel PROSet) Although I have turned the
wireless LAN off using the Turn Off Wireless LAN
button in PROSet, the Wireless LAN LED is still
on.
A Thisisnormal.TheTurnOffWirelessLANbuttonin
PROSet
justturnsoffthewirelessLANsoftware.The
wirelessLANhardwareisnotaffectedbythisoperation.