Confidential
Chapter 2 Installing System
RFV01U-D2A Installation Manual v2.0 42
Copyright © 2017, All Rights Reserved.
Figure 42. Marking_Wall Type
To drill anchor holes and fix anchors, do the following:
1
Make sure you have the following items:
Table 12. Parts and Tools for Drilling and Anchoring
Category Description
Parts 1, 3 Sector Installation M10 Strong Anchor 4 EA/RRH
2 Sector Installation 4 EA
Woking Tools
Hammer Drill
If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
[1 Sector Side and Standard Mounting Bracket Assembly]
5.11 (130)
[3 Sector Standard Installation Mounting Bracket Assembly]
≥ 18.64 (473)
Unit: in. (mm)/ : Marking Point
2.36
(60)
≥ 18.64 (473)
[3 Sector Side Installation Mounting Bracket Assembly]
≥ 12.79 (325) ≥ 12.79 (325)
To Next Page
Loading...