MDC(Multi Display Control) Program
MDC(Multi Display Control) Program
-. How to use
Connect the serial port of the PC and Beethoven Board with the RS232C cable.
Option in the Factory Menu : Check if BaudRate is set to 9600.
A Multiple Display Control (MDC) is an application allowing various
displays to be easily and simultaneously operated on a PC. RS-
232C, a standard of serial communication, is used for the
communication between a PC and a display. Therefore, a serial
cable should be connected between the serial port on a PC and the
serial port on a display.
Refer to the diagram.
To Next Page
Loading...
