Main V Peaking Y
Main V Peaking UV
Main V Peaking Coring
Main V Peaking Region 1
Threshold
Main V Peaking Region 1 Gain
Main V Peaking Region 2 Threshold
Main V Peaking Region 2 Gain
Main H Peaking Y
Main H Peaking UV
Main H Peaking Coring
Main H Peaking Region 1 Threshold
Main H Peaking Region 1 Gain
Main H Peaking Region 2 Threshold
Main H Peaking Region 2 Gain
Sharpness Noise Coring
Scaling Filter Sharpness Control – Peaking Y / Peaking UV
This adjusts the sharpness of luminance(Y) and color(UV). The bigger the number is in the
range of 1~127, the clearer the picture is. The bigger the number is in the range of 128~255,
the more natural video is. Too high sharpness may cause the vivid noise.
Noise Coring Control – Peaking Coring
Display only the sharp large-edge without assuming the small-edge of the video as a noise and
amplifying it.
Sharpness Filter
Out
Noise Coring
Out
Peaking Coring
Assign the threshold value to
improve the sharpness.
NonLinear Sharpness Control – Peaking Resion1/2 Threshold, Gain
Divide the frequency area and apply the different Gain for each area rather than evenly apply the
sharpness level over the whole image.
Noise Coring
Out
Nonlinear
Out
Peaking Region1 Threshold
Peaking Region2 Threshold
Peaking Region1 Gain
Peaking Region2 Gain
H : Horizontal
V : Vertical
Sharpness Part
Sharpness Part
To Next Page
Loading...
