This feature is available only for the displays whose power status is ON and if no selection is made, the factory
This feature is available only for the displays whose power status is ON and if no selection is made, the factory
default is displayed.
default is displayed.
Setting Control - Picture
1. Click Settings of the main icons to display the Settings Control screen.
-
Info Grid shows some basic information necessary to Setting Control. When each
function is selected, the set value of the selected function is displayed in the slide. As
you select Select All, the value is returned to the default setting (50).
Changing a value in this screen will automatically change the mode to “CUSTOM.”
1) Picture
Available only for TV, AV, S-Video, Component, and DVI(HDCP).
2) Contrast
Adjusts Contrast of the selected display.
3) Brightness
Adjusts Brightness of the selected display.
4) Sharpness
Adjusts Sharpness of the selected display.
5) Color
Adjusts Color of the selected display.
6) Tint
Adjusts Tint of the selected display.
7) Color Tone
Adjusts Color Tone of the selected display.
1
2
3
4
5
6
7
MDC(Multi Display Control) Program
MDC(Multi Display Control) Program
To Next Page
Loading...
