Satec BFM 136 - Local Settings; Meter Security

Chapter 3 BFM136 Graphical Display Operations Menu Operations
Branch Feeder Monitor 136_Installation Operation and Manual 35
3.5.9 Local Settings
This menu allows you to configure your local time zone settings.
To enter the menu, select the Local entry from the main menu, and then press the ENTER button. For
instructions on navigating in the menu, see Viewing and Changing Setup Items.
The following table lists available options.
Label
Parameter
Options
Default
Description
Country
Country code
Default, or country
name
Default
Defines a currency and calendar settings. The
default setting stands for the U.S.A.
Daylight
Daylight saving time
(DST) option
Disabled, Enabled
Disabled
When DST is disabled, the RTC will operate in
standard time only. When enabled, the
BFM136 will automatically update the time at
2:00 AM at the pre-defined DST switch dates.
DST Mon
DST start month
January-December
April
The date when Daylight Saving Time begins.
The DST switch point is specified by the month,
week of the month and weekday. By default,
DST starts at 2:00 AM on the first Sunday in
April of each year.
DST Week
DST start week of
the month
First, Second, Third,
Fourth, Last
First
DST Day
DST start day of the
week
Sunday-Saturday
Sunday
End Mon
DST end month
January-December
October
The date when Daylight Saving Time ends.
The DST switch point is specified by the month,
week of the month and weekday. By default,
DST ends at 2:00 AM on the last Sunday in
October of each year.
End Week
DST end week of
the month
First, Second, Third,
Fourth, Last
Last
End Day
DST end day of the
week
Sunday-Saturday
Sunday
3.5.10 Meter Security
This menu allows you to change the user password and define a level of the device security for accessing
the BFM136 through communication ports.
To enter the menu, select the Access entry from the main menu, and then press the ENTER button. For
instructions on navigating in the menu, see Viewing and Changing Setup Items.
The following table lists available options.
Label
Parameter
Options
Default
Description
Password
User password
0-99999999
Factory set
(consult
your dealer)
A user password for accessing the device menus. It is
effective for the display and for all ports
Com.Pass
Remote password
checking
OFF, ON
ON
Controls password checking when the BFM136 is
accessed through communication ports
Local Exit
Local Country
Default
ENTER
Access Exit
Access Password
9
ENTER