Satec BFM 136 - Display Settings

Chapter 3 BFM136 Graphical Display Operations Menu Operations
Branch Feeder Monitor 136_Installation Operation and Manual 36
3.5.11 Display Settings
This menu allows you to configure options for the BFM136 display.
To enter the menu, select the Display entry from the main menu, and then press the ENTER button.
For instructions on navigating in the menu, see Viewing and Changing Setup Items.
The following table lists available options.
Label
Parameter
Options
Default
Description
Update
Display update rate
1-10 sec
1 sec
Defines the interval between display updates
Scroll
Auto scroll interval
None, 2-15 sec
None
Defines the scroll interval for the main data display or
disables auto scroll
Auto Ret
Auto return to the
main screen
Disabled, Enabled
Enabled
Enables automatic return to the main display if no
buttons are pressed for 5 minutes
Backlit
Backlight control
Off, On
Off
ON - the backlight is still lights all the time.
OFF - the backlight is turned off in 1 minute if no
button is pressed.
Display Exit
Display Update
1
ENTER