Chapter 2 Installation Mechanical I N S T A L L A T I O N
PM130 PLUS Powermeter Series 21
Panel Mounting
To mount the meter in cutout (ANSI 4" round or DIN 92x92mm square
cutout):
1. Position the meter in the cutout.
2. Affix the meter using washers and nuts. (Add short text on Panel
Mounting, a heading should always have text)
Figure 2-2. Mounting
DIN Rail Mounting
The PM130 can be mounted on a 35-mm DIN rail.
Figure 2-3. Dimensions
To Next Page
Loading...
