Satel Versa - Programming an Exception; Selecting the Arming Mode

34 User Manual SATEL
digit, the time will not be programmed). In the LCD keypad, the values being programmed
are displayed, the key moves the cursor to the right, and the or key - to
the left. In the LED keypad, the whole sequence of 8 digits is to be entered at once. As
only the first 6 out of 8 digits can be presented on the LEDs, programming by means of
the LED keypad is not recommended. Press the key to confirm the entered data.
2. Step 4. Programming timer activation/deactivation time on Tuesday. Programming is
effected in the same way as in Step 3.
3. Step 5. Programming timer activation/deactivation time on Wednesday.
Programming is effected in the same way as in Step 3.
4. Step 6. Programming timer activation/deactivation time on Thursday. Programming
is effected in the same way as in Step 3.
5. Step 7. Programming timer activation/deactivation time on Friday. Programming is
effected in the same way as in Step 3.
6. Step 8. Programming timer activation/deactivation time on Saturday. Programming is
effected in the same way as in Step 3.
7. Step 9. Programming timer activation/deactivation time on Sunday. Programming is
effected in the same way as in Step 3.
8. Step 10. Programming timer activation/deactivation time on every day of the week.
Programming is effected in the same way as in Step 3.
9. After pressing the key in Step 10, you will be taken back to Step 2.
6.20.2 Programming an exception
The exception is a period when the timer will be activated/deactivated at a different time than
provided for by the weekly schedule. The programming is carried out in the same way for
each of the four exceptions.
1. Step 3. Programming the date from which the exception will be valid. You should
program the year (the two last digits only), month and day. The digits are to be entered by
using suitable keys (they are displayed in the LCD keypad, and presented in the binary
mode on LEDs in the LED keypad – see: page 20, Table 1). Press the key to
confirm the entered data.
2. Step 4. Programming the date to which the exception will be valid. Programming is
effected in the same way as in Step 3.
3. Step 5. Programming the timer activation/deactivation time when the exception is
valid. The data should be entered in the same way as when programming the timer
activation/deactivation time in the weekly schedule.
4. After pressing the key in Step 5, you will be taken back to Step 2.
6.20.3 Selecting the arming mode
Selecting the arming mode is effected in the same way as for partitions 1 and 2. To select the
arming mode, press in turn the following keys:
- full arming;
- night arming;
- day arming;
- timer does not arm the partition.
In the LCD keypad, the arming mode is displayed. In the LED keypad, it is presented on the
LEDs: the blinking LED indicates which mode is currently selected (LED 1 – full arming; LED
2 – night arming; LED 3 – day arming; no LED is blinking – the timer does not arm).
After the armed mode is selected, you will be taken back to Step 2.