SATO S84NX - Page 136

S84NX/S86NX Service Manual
134
Back to top 6 Troubleshooting
Error Number Type of Error Error Icon LED Buzzer
1008
Out of Paper Light in red
Short
sound,
3 times
Message Check and load paper properly.
To clear the display
Load the media and open/close the print head, or press the left select button
(OFFLINE) or LINE button.
Causes
1) The media is not loaded.
2) The media is not loaded correctly.
3) The media sensor level is not set correctly.
4) The media has jammed.
5) The media sensor is not operating correctly.
Countermeasures
1) 2)
Load the media correctly.
3) Adjust the media sensor level.
4) Remove the jammed media.
5) Clean the media sensor.
1009
Ribbon End
Light in red
Short
sound,
3 times
Message Receiving buff er full. Check host program.
To clear the display
Load the ribbon correctly and close the print head, or press the left select
button (OFFLINE) or LINE button.
Causes
1) The ribbon is not loaded.
2) The ribbon is not loaded correctly.
3) There is no ribbon.
4) The ribbon sensor is not operating correctly.
Countermeasures
1) Load the ribbon.
2) Load the ribbon and the media correctly.
3) Load a new ribbon.
4) Clean and adjust carbon ribbon path.