2 Installation
2--3
F--9999--8 Build 8 Issue 1
2.1 Installation Requirements
Fig. 2-1. Scotty 5000
All procedures in this section provide advance planning and site preparation data for installation of the Scotty
5000. Environmental requirements, unpacking instructions, and electrical and physical specifications are
included. This information should be used as a reference during the development of site preparation plans
before you install your machine.
If any questions arise while performing any of the following procedures, contact
Training is available from Scott Office Systems at / eight hour day, plus all travel expenses.
Note ! A forklift is required to lift the machine o ff the shipping skid and place it on the floor.
To Next Page
Loading...