3 Operation
3--14
F--9999--8 Build 8 Issue 1
ADJUSTMENT KNOB
Fig. 3-24. Loosen Guide Roller Adjustment
Knob
Reel Holder
Step: 1. Loosen adjustment knob on the bottom
roller guide.
ROLLER
ROLLER GUIDES
3 FILM THICKNESS
Fig. 3-25. Set Gap Between Plastic Feed Roller
Guides to 3 Film Thickness
Step: 2. Set the gap between the plastic feed
roller guides to 3 film thickness by
moving the lower roller guide.
Step: 3. Tighten the adjustment knob.
To Next Page
Loading...