Connectivity
●
Establish the connection with the wireless
network (WLAN)
›››
page 53.
●
Press the WPS button on the WLAN router
1)
until the warning light on the router starts
flashing.
●
OR: Press and hold the WLAN button on the
WLAN router until the WLAN light on the router
starts flashing.
●
Press the WPS button on the WLAN device.
The wireless (WLAN) connection is establish-
ed.
Repeat this process to connect other wireless
devices.
Configuring internet access
The Infotainment System can use the WLAN
hotspot of an external wireless device to es-
tablish an internet connection.
Establishing the connection with the wire-
less network (WLAN)
●
Activate and check the wireless hotspot on
the external device. If necessary, refer to the
manufacturer’s instruction manual.
●
Press the Infotainment
button and
then press the
Settings
menu; OR access
Media or SEAT Media Control mode and press
the SETTINGS menu.
●
Press the WLAN menu and then enter Inter-
net access settings on your phone and acti-
vate the checkbox.
●
Press the Find function button and select
the wireless device you want from the list.
●
If necessary, enter the network key of the
wireless device in the Infotainment System
and confirm with OK.
To manually enter the net-
work settings of an external wireless
(WLAN) device.
The wireless (WLAN) connection is establish-
ed. To complete the connection, it may be
necessary to enter other data into the wire-
less device.
Note
Due to the large number of different wire-
less devices in existence, it is not possible
to guarantee fault-free operation of all
functions.
Manual settings:
1)
If the WLAN router does not support WPS the
network must be configured manually.
29
To Next Page
Loading...
