Audio and Media Mode
Starting the WLAN audio transfer
●
Lower the base volume on the Infotainment
system.
●
Start the UPnP app or the app for the play-
back of the WLAN audio source.
●
In the MEDIA main menu, press the SOURCE
function button and select WLAN .
●
Please refer to the instructions on the
screen of the Infotainment system and on the
WLAN audio source regarding the rest of the
procedure.
Controlling playback
The extent to which the WLAN audio source
can be controlled via the Infotainment system
depends on the connected WLAN audio
source and the application used.
Note
●
The Infotainment system does not pro-
vide an internet connection, it only estab-
lishes a wireless connection between the
mobile device and said system.
●
Via the WLAN, only the connection be-
tween the device and the Infotainment sys-
tem can be guaranteed, its operation de-
pends on the application itself.
WLAN setup
3 Only available for the model: Navi System
(with WLAN connection) and Navi System Plus.
To access the WLAN settings, the ignition
must be on.
●
Select the MEDIA main menu by pressing
the Infotainment button
.
●
Press the SETTINGS function button to open
the
Media Settings
menu.
●
Press the WLAN function button, then the
Share connection through WLAN
button
will appear, together with a text with informa-
tion about using the WLAN.
●
Press the
Share connection through
WLAN
function button, and you will then be
able to
Enable WLAN connection
and ac-
cess the
Configuration
of the WLAN net-
work.
●
Press the
Configuration
function button
to configure the WLAN network.
Function button: function
Enable WLAN connection : To switch the WLAN net-
work on/off.
Security level : WPA2 encryption automatically
generates an 8-character network key.
Function button: function
Network key : Network key automatically gener-
ated. Press the function button to manually
change the network key. The network key must
have a minimum of 8 characters and a maximum
of 63.
SSID : Name of the Infotainment system WLAN
network.
Do not send network name (SSID) : Activate the
checkbox to deactivate the visibility of the WLAN
network.
To save the changes made to the mobile hot-
spot configuration, press the STORE
button.
54
To Next Page
Loading...
