Sekonic SPECTROMASTER C-800 - Page 195

183
8. Hardware Setting Screen
2.
Touch the [Yes] button.
The factory setting conrmation message "All measurements will be lost when
you perform this operation. Are you sure?" will be displayed.
Conrm again.
To return to the Hardware Setting screen without resetting to factory default settings,
touch the [No] button.
3.
Touch the [Yes] button.
NOTICE
When the message "Deleting Memory. Please wait." or the progress bar
is displayed, do not turn the power off.
All measurement values are deleted, and returns to the Hardware Setting screen.
(English display is the default factory setting.)
Factory Setting Conrmation
Screen
Hardware Setting ScreenFactory Setting Screen
[No] Button
[Yes] Button
[Close] Button