Sekonic SPECTROMASTER C-800 - Selecting the White Balance Step

137
7. Meter Settings [Setting] Screen
Operation
1.
Touch the item [White Balance Step] button on page 1 of Setting.
The white balance step will be displayed.
7-2-6 Selecting the White Balance Step
Select the unit per step displayed per grid cell on the WB Corr. Mode measurement
screen from a range of BA: 0.5 to 100.0MK
-1
,GM: 0.5 to 20.0.
Some cameras have white balance function, however, the setting of grid cell varies
depending on the cameras. Match the setting to the camera.
White Balance Step Screen
White Balance Step Screen
Default
Setting Screen