22
4. Basic Operations
4-2 Selecting the Measuring Mode
4-2-1 Matching Measuring Mode with Light Sources
Select the Measuring Mode to use.
NOTICE
If you change the Measuring Mode, the currently displayed measurement is cleared.
No. Measuring Mode Icon Description
1
Ambient Light Mode
Measures continuous light such as sunlight, tungsten,
uorescent, and LED lights. (
P85)
2
Cordless Flash Mode
Detects ash light without meter-ash connection
after Measuring Button pressed to arm meter (for 90
seconds) and ash red separately. (
P88)
3
Cord (PC) Flash Mode
Detects ash light with PC (synchro) cord meter-ash
connection. (
P92)
Measuring Mode Selection Screen
1
2
3
To Next Page
Loading...
