Sekonic SPECTROMASTER C-800 User Manual

11
2. Before Use
2-6 Replacing Batteries
●
Always turn off the power before replacing batteries.
If you replace batteries while the power is turned on, the measured values that are
obtained during operations are not saved. Also, this may cause a failure.
●
If an unexpected display appears on the LCD during battery replacement or
measurement, ie. settings other than selected, or if the meter does not respond when
a button is pressed, remove the batteries, wait at least 10 seconds, and then re-install
them.

Sekonic SPECTROMASTER C-800 Specifications

General

Type	Spectrometer
Color Temperature Range	1, 600 to 40, 000 K
Spectral Wavelength Range	380 to 780 nm
Power Source	Rechargeable lithium-ion battery
Operating Temperature	0 to 40°C (32 to 104°F)
Display	Color LCD
Measurement Range	1 to 200, 000 lx
Spectral Response	Human eye response
Connectivity	USB
Weight	350 g (including battery)
Memory Capacity	Up to 1, 000 measurements